2009 John Deere 9670 STS
Інформаційне оголошення про техніку стороннього продавця. Продаж техніки через DeAgora не здійснюється. Послуги огляду та перевезення є необов’язковими.
Опис та характеристики з оголошення
Технічні характеристики узагальнюють дані вихідного оголошення. Уточніть конкретну машину, стан, комплектацію та включене обладнання.
Загальна інформація
2009 John Deere 9670 STS — вживана техніка, категорія «зернозбиральний комбайн», оголошення з країни США. Нижче наведено заявлені в джерелі характеристики.
- Рік
- 2009
Напрацювання
- Мотогодини двигуна — 2026-10-07
- 3996 h
- Години роботи сепаратора
- 2683 h
Заявлені характеристики — технічний текст джерела
- Reported feature
- Corn/Bean
- Reported feature
- 2WD
- Reported feature
- Duals
- Reported feature
- Chopper
- Reported feature
- Contour Master (Lateral Tilt Feederhouse)
- Header
- No
- Reported feature
- Performance
- Reported feature
- >> Corn and Soybean Customer
- Reported feature
- > High yielding or high moisture corn
- Reported feature
- >> Not recommended for use in small grains
- Reported feature
- Premium Cab
- Reported feature
- Contour-Master Feederhouse with Reverser and High-Torque
- Reported feature
- Variable Speed Drive System
- Reported feature
- 3.15 In. (80 mm) Feederhouse Lift Cylinders
- Reported feature
- Premium Header Control Package
- Reported feature
- Round Bar Multi-Crop Concave
- Reported feature
- Deep Tooth Adjustable Chaffer and Bottom Sieve
- Reported feature
- General Purpose Grain Handling System with High Capacity Unloading
- Reported feature
- System and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not available
- Reported feature
- for Export)
- Reported feature
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated
- Reported feature
- Chaff Spreader and Single-Point Adjustable Knife Bank
- Reported feature
- Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System
- Reported feature
- 20.8R-38 In. Two Star Cleat R1 Radial
- Reported feature
- Wide Spaced Duals for use in 30 In. Rows
- Reported feature
- Adjustable Rear Axle with Heavy-Duty Spindles
- Reported feature
- 18.4R-26 In. Two Star Cleat R1
- Reported feature
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Reported feature
- Clean Grain Auger and Fan Bottom Protection Shielding
- Reported feature
- ROUND BAR CONCAVE
- Reported feature
- 20.8X38 DUALS 90%
- Reported feature
- C/M FEEDERHOUSE WITH HIGH TORQUE REVERSER
- Reported feature
- DEEP TOOTH CHAFFER AND SEIVE
- Reported feature
- HIGH CAP UNLOAD
- HAS HAD THE FOLLOWING REPLACED IN LAST 400 HOURS
- CONCAVES
- Reported feature
- CLEAN GRAIN GEARBOX
- Reported feature
- UNLOAD AUGER GEARBOX
- Reported feature
- CHAFFER FRAME
- Reported feature
- TIRES
- Reported feature
- UNLOAD AUGERS WERE REPLACED ABOUT 1700HR AGO
Заявлені продавцем стан і гарантія — текст джерела
- Seller-reported statement
- Tire notation 18.4X26 with a stated 90% figure. The percentage basis and actual condition must be confirmed.
- Seller-reported statement
- The source lists the CG bottom boot among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source lists the radiator among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source lists the shaker arms among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source reports an inspection two years earlier. The reference date, findings and inspection records are unverified.
- Seller-reported statement
- The source says the machine has just returned from field use. Current condition and operating hours must be confirmed.
- Pending repair
- The source says the machine is awaiting a new feederhouse shaft. Installation and repair completion are not established.
- Workshop-status limitation
- The source states that the machine has not passed through the workshop. Inspection, service and readiness are not established.
Додаткові відомості
- Примітка щодо даних джерела (англійською): Reported work includes concaves, clean-grain boot/gearbox, unload gearbox, radiator, chaffer frame, shaker arms and tires within the preceding 400 operating hours, plus unload augers about 1700 hours earlier. These are service-history intervals, not current counters. The machine is waiting for a new feederhouse shaft and has not been through the shop; work completion requires confirmation.
- Примітка щодо даних джерела (англійською): The source reports its hour-update date as 2026-10-07. This is distinct from the date the listing was checked; it is not assumed to date every individual meter reading.
- Уточніть актуальну наявність, стан і комплектацію в оригінальному оголошенні. Продаж техніки через DeAgora не здійснюється; огляд і перевезення є додатковими послугами.