2009 John Deere 9670 STS
Annonce informative de matériel d’un tiers. Le matériel n’est pas vendu par l’intermédiaire de DeAgora. Les services d’inspection et de transport sont facultatifs.
Détails et caractéristiques de l’annonce
Les caractéristiques résument les informations déclarées dans l’annonce source. Confirmez la machine exacte, son état, sa configuration et l’équipement inclus.
Aperçu
2009 John Deere 9670 STS : moissonneuse-batteuse d’occasion annoncé aux États-Unis. Les caractéristiques ci-dessous proviennent de l’annonce source.
- Année
- 2009
Heures de fonctionnement
- Heures moteur — 2026-10-07
- 3996 h
- Heures du séparateur
- 2683 h
Caractéristiques déclarées — texte technique de la source
- Reported feature
- Corn/Bean
- Reported feature
- 2WD
- Reported feature
- Duals
- Reported feature
- Chopper
- Reported feature
- Contour Master (Lateral Tilt Feederhouse)
- Header
- No
- Reported feature
- Performance
- Reported feature
- >> Corn and Soybean Customer
- Reported feature
- > High yielding or high moisture corn
- Reported feature
- >> Not recommended for use in small grains
- Reported feature
- Premium Cab
- Reported feature
- Contour-Master Feederhouse with Reverser and High-Torque
- Reported feature
- Variable Speed Drive System
- Reported feature
- 3.15 In. (80 mm) Feederhouse Lift Cylinders
- Reported feature
- Premium Header Control Package
- Reported feature
- Round Bar Multi-Crop Concave
- Reported feature
- Deep Tooth Adjustable Chaffer and Bottom Sieve
- Reported feature
- General Purpose Grain Handling System with High Capacity Unloading
- Reported feature
- System and 22.5 Ft. (6.9M) 1-Piece Unloading Auger (Not available
- Reported feature
- for Export)
- Reported feature
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated
- Reported feature
- Chaff Spreader and Single-Point Adjustable Knife Bank
- Reported feature
- Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System
- Reported feature
- 20.8R-38 In. Two Star Cleat R1 Radial
- Reported feature
- Wide Spaced Duals for use in 30 In. Rows
- Reported feature
- Adjustable Rear Axle with Heavy-Duty Spindles
- Reported feature
- 18.4R-26 In. Two Star Cleat R1
- Reported feature
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Reported feature
- Clean Grain Auger and Fan Bottom Protection Shielding
- Reported feature
- ROUND BAR CONCAVE
- Reported feature
- 20.8X38 DUALS 90%
- Reported feature
- C/M FEEDERHOUSE WITH HIGH TORQUE REVERSER
- Reported feature
- DEEP TOOTH CHAFFER AND SEIVE
- Reported feature
- HIGH CAP UNLOAD
- HAS HAD THE FOLLOWING REPLACED IN LAST 400 HOURS
- CONCAVES
- Reported feature
- CLEAN GRAIN GEARBOX
- Reported feature
- UNLOAD AUGER GEARBOX
- Reported feature
- CHAFFER FRAME
- Reported feature
- TIRES
- Reported feature
- UNLOAD AUGERS WERE REPLACED ABOUT 1700HR AGO
État et garantie déclarés par le vendeur — texte source
- Seller-reported statement
- Tire notation 18.4X26 with a stated 90% figure. The percentage basis and actual condition must be confirmed.
- Seller-reported statement
- The source lists the CG bottom boot among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source lists the radiator among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source lists the shaker arms among components replaced within the last 400 operating hours. Installation history and the reference meter reading are unverified.
- Seller-reported statement
- The source reports an inspection two years earlier. The reference date, findings and inspection records are unverified.
- Seller-reported statement
- The source says the machine has just returned from field use. Current condition and operating hours must be confirmed.
- Pending repair
- The source says the machine is awaiting a new feederhouse shaft. Installation and repair completion are not established.
- Workshop-status limitation
- The source states that the machine has not passed through the workshop. Inspection, service and readiness are not established.
Détails supplémentaires
- Remarque sur les données source (anglais) : Reported work includes concaves, clean-grain boot/gearbox, unload gearbox, radiator, chaffer frame, shaker arms and tires within the preceding 400 operating hours, plus unload augers about 1700 hours earlier. These are service-history intervals, not current counters. The machine is waiting for a new feederhouse shaft and has not been through the shop; work completion requires confirmation.
- Remarque sur les données source (anglais) : The source reports its hour-update date as 2026-10-07. This is distinct from the date the listing was checked; it is not assumed to date every individual meter reading.
- Confirmez la disponibilité, l’état et la configuration dans l’annonce d’origine. La vente du matériel ne s’effectue pas sur DeAgora; l’inspection et le transport sont des services facultatifs.