2010 John Deere 9770 STS
Informational third-party equipment listing. Equipment is not sold through DeAgora. Inspection and transport services are optional.
Listing details & specifications
Technical details summarize information reported in the source listing. Confirm the exact machine, condition, configuration and included equipment.
Overview
2010 John Deere 9770 STS: used combine harvester listed in Canada. The specifications below reflect the source listing.
- Year
- 2010
Operating hours
- Engine hours — 2026-08-31
- 4190 h
- Separator hours
- 3210 h
Reported specifications
- Reported feature
- Small Grain
- Reported feature
- Duals
- Reported feature
- Contour Master (Lateral Tilt Feederhouse)
- Header
- No
- Reported feature
- Premier Cab
- Reported feature
- Contour-Master Feederhouse with Reverser and High-Torque
- Reported feature
- Fixed Speed Drive System
- Reported feature
- 3.15 In. (80 mm) Feederhouse Lift Cylinders
- Reported feature
- Small Wire Concave (Not available for Australia)
- Reported feature
- General Purpose Adjustable Chaffer and Bottom Sieve
- Reported feature
- General Purpose Grain Handling System with High Capacity Unloading System and 22.5 Ft. (6.9M) With Extender
- Reported feature
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated
- Reported feature
- Chaff Spreader and Single-Point Adjustable Knife Bank
- Reported feature
- Heavy-Duty Final Drive and Heavy-Duty Hydrostatic Drive System
- Reported feature
- 520/85R38 155A8 R1 Radial (50%)
- Reported feature
- Adjustable Rear Axle with Heavy-Duty Spindles
- Reported feature
- 480/70R30 152A8 R1W (85%)
- Reported feature
- Engine Coolant Heater - 110 Volt (Not available for Export)
- Reported feature
- Sectionalized Concave Cover Plates (Set of 3 covers with 4 pieces to make one complete cover)
- Reported feature
- for Large Wire and Small Wire Concaves only
- Reported feature
- Less ProDrive Transmission and HarvestSmart Feed Rate Control
- Reported feature
- ITC Receiver with Jumper and Display
- Reported feature
- Large Wire and Small Wire Concaves
- Reported feature
- Contour-Master Feederhouse with Reverser and High-Torque Fixed Speed Drive System
- Reported feature
- Wing Blade Wide-Spread, Fine Cut, 2-Speed Chopper with Integrated Chaff Spreader and Single-Point Adjustable Knife Bank
- Reported feature
- Sectionalized Concave Cover Plates (Set of 3 covers with 4 pieces to make one complete cover) for Large Wire and Small Wire Concaves only
Seller-reported condition and warranty
- Seller-reported warranty
- No Warranty
Additional details
- Source data note: The source reports its hour-update date as 2026-08-31. This is distinct from the date the listing was checked; it is not assumed to date every individual meter reading.
- Confirm current availability, condition and configuration with the original listing. Equipment is not sold through DeAgora; inspection and transport are optional services.